Ir para o conteúdo principal

Tabela de Conteúdos

Wiki contribuído por estudante

Uma equipe incrível de estudantes do nosso programa de educação fez esta wiki.

Camera will not turn on

Even if you press the power button, the camera does not respond.

Drained or Bad Battery

If the your camera won't turn on, the battery may just be dead or faulty, so just replace the battery.

Battery Inserted Backwards

Your camera may not be turning on simply because the battery was inserted backwards. Try replacing the battery.

Dirty Battery Port

It is possible that there is dirt built up at the battery connection site which would prevent the camera from turning on, so just clean out the battery port with a cleaning cloth.

Bad Motherboard

If your camera is not turning on, the problem may be solved by replacing the motherboard.

Flash is not working

When trying to take a photo with flash, the flash won't go off.

Camera not set to flash

You may not have the camera on the proper setting to use the flash for your photo.

Flash bulb is burnt out

The flash may not be working because the bulb needs to be replaced.

Camera will not focus

When trying to take a photo, the camera won't focus the image.

Lens is dirty

If there appears to be some dirt on the lens, clean it with a cleaning cloth.

Lens is cracked or scratched

If you see any damage directly on the lens, you should replace the lens.

Bad Motherboard

If the camera won't focus, you might be able to fix it by replacing the motherboard.

LCD Screen Errors

The LCD screen shows errors when you turn the camera on.

Loose LCD connection on motherboard

There may be a loose connection between the LCD screen and the motherboard. To fix this, check out our LCD connection repair guide.

Bad LCD Screen

The LCD screen may be showing errors because it is faulty and needs replacement. Take a look at our LCD screen replacement guide to get this bad boy back in working order.

Equipe

USF Tampa, Team 3-6, Sullivan Spring 2016 Membro de USF Tampa, Team 3-6, Sullivan Spring 2016

USFT-SULLIVAN-S16S3G6

4 Membros

Autoria de 12 guias

12 comentários

I have a FujiFilm FinePix S1, and my flash will not come on. The screen just says that it is off even when the flash is up to go off. What do I need to do to fix this?

tasluvsu32294 - Responder

Sorry I can,t help you , but I have a problem of my own. When switching camera on , the power comes on but screen stays blank as if shutter is jammed closed. The LCD screen comes up with all the menu. On the LCD screen a digital pic of a camera and explanation mark in RED. Any ideas as the camera is only 2 years old and hardly used

David Jack - Responder

I have a finePixS. When turned on it says i should turn it off, remove lens cap and turn again. But the lens cap is off already. Help anyone?

Cecil Nundwe - Responder

Could this be a mechanic issue (friction) with the zoom lens? That's what I have been suffering for long.

mw120970 -

I cannot figure out how to fully extend my fuji s2500 hd camera len

Barbara Redwine - Responder

My finepix s won’t turn on. When you slide the on/off to the on position, it lights up green, plays its tone for a second then nothing. Do you think this could be the motherboard?

Royce Smith - Responder

Did you ever figure out what was wrong with your camera because mine is doing the exact same thing.

Leah Corey -

My FujiFilm FinePix S1 now has a permanent spot on all images which my dealer tells me is dust on the sensor. Can I do anything with this?

robin.whyte@dal.ca - Responder

No reply to this but Leah Corey has the same problem. Is there a solution?

robin.whyte@dal.ca - Responder

,the lens is from the camera body. Focus error

Edward iz6 - Responder

the lens is outside the camera body.....

Edward iz6 - Responder

camera runs on mains, fails when power turned to

battery

andy - Responder

Comentar

Visualizações:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 17

Ao todo: 5,202