/
Minha bancada de trabalho

Obtenha acesso rápido a guias, peças e respostas para seus dispositivos

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Cadastre-se
Login

Nettoyage ou remplacement du pavé numérique Atari 5200

Voltar para o guia
Inglês
Francês
Próximo passo

Traduzindo o passo 1

Passo 1
Atari 5200 Number Pad Cleaning or Replacement, Open the controller: passo 0, imagem 1 %32 Atari 5200 Number Pad Cleaning or Replacement, Open the controller: passo 0, imagem 2 %32 Atari 5200 Number Pad Cleaning or Replacement, Open the controller: passo 0, imagem 3 %32
Open the controller

  • Turn the controller over.

  • Remove the three 6mm screws from the back.

  • Carefully slide and pull the two parts of the controller shell apart, exposing the innards.

  • Do not move the joystick when reassembling. This will break your alignment. The less the joystick is moved, the easier it will be to realign the joystick.

Ouvrir le contrôleur

Retournez le contrôleur en exposant les trois vis à l'arrière (marquées par les cercles orange). Utilisez un tournevis de 6 mm pour retirer ces vis.

Faites glisser et séparez soigneusement les deux parties de la coque du contrôleur, exposant les entrailles.

Essayez de ne pas déplacer le joystick lors du remontage. Cela brisera presque assurément votre alignement. Moins le joystick est déplacé, plus il sera facile de réaligner le joystick sur les pots.

[title] Open the controller
-[* black] Turn the controller over, exposing the three screws on the back (marked by the orange circles). Use a 6mm screwdriver to remove these screws.
+[* black] Turn the controller over.
+[* red] Remove the three 6mm screws from the back.
[* black] Carefully slide and pull the two parts of the controller shell apart, exposing the innards.
-[* icon_caution] Try not to move the joystick when reassembling. This will almost assuredly break your alignment. The less the joystick is moved, the easier it will be to realign the joystick to the pots.
+[* icon_caution] Do not move the joystick when reassembling. This will break your alignment. The less the joystick is moved, the easier it will be to realign the joystick.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.