Aviso: Você está editando um guia tipo pré-requisito. Todas as alterações que você fizer afetarão todos os 20 guias que incluem este passo.
Traduzindo o passo 3
Passo 3
-
Lift the inner edge of the optical drive and maneuver its connector past the GPU frame attached to the logic board.
-
Carefully pull the optical drive off its mounting pins on the right side of the outer case to gain clearance for disconnecting the optical drive cable.
-
Allow the optical drive to hang down as you de-route the optical drive thermal sensor connector from behind the GPU heat sink.
Suas contribuições são licenciadas pela licença de código aberto Creative Commons.