Aviso: Você está editando um guia tipo pré-requisito. Todas as alterações que você fizer afetarão todos os 4 guias que incluem este passo.
Traduzindo o passo 1
Passo 1
Unscrewing the Foot Cover
-
Flip device upside-down so the plastic white board is facing the ground.
-
Locate the four feet in the corners of the Balance Board.
-
Unscrew the three 12.7 mm Phillips screws from each foot cover.
Suas contribuições são licenciadas pela licença de código aberto Creative Commons.