Aviso: Você está editando um guia tipo pré-requisito. Todas as alterações que você fizer afetarão todos os 13 guias que incluem este passo.
Traduzindo o passo 4
Passo 4
-
Grasp the small tab at the end of one of the bottom edge display adhesive strips and pull the adhesive toward the top of the iMac to remove it.
-
Repeat this step with the other adhesive strip and remove it.
| [* icon_caution] Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply (boxed in red). | |
| [* black] Grasp the small tab at the end of one of the bottom edge display adhesive strips and pull the adhesive toward the top of the iMac to remove it. | |
| [* black] Repeat this step with the other adhesive strip and remove it. | |
| - | [* icon_note] If either adhesive strip breaks before it's removed, use a plastic card to slice through the remaining adhesive. |
| + | [* icon_note] If either adhesive strip breaks before it's removed, use a [product|IF145-101|plastic card] to slice through the remaining adhesive. |
Suas contribuições são licenciadas pela licença de código aberto Creative Commons.