Histórico da introdução: Installing a Plastic Snap Using a Hand Press

dispositivo	Patagonia Snap
Type	replacement
Thing	Plastic Snap
Title	Installing a Plastic Snap Using a Hand Press
Introduction	Oh snap! The snap on your jacket just blew out. Fortunately, replacing it is easy. You’ll need the help of a hand press and a new snap. The hand press should be mounted firmly to a sturdy workbench—otherwise, it might slip and damage your project (or worse yet, injure you). Before you get started, make sure you check the fabric to determine whether or not it’s been damaged to the point where it cannot support a new snap. If the fabric has been damaged, you’ll need to sew a reinforcing patch onto the fabric before replacing the snap. For replacement parts or further assistance, contact [link|http://www.patagonia.com/us/patagonia.go?assetid=3915|Patagonia Customer Service].
Time Required Min	10 minutos
Time Required Max	10 minutos
Imageid	Antes Depois
Difficulty	Easy
Conclusion	Admire your handiwork!
Author	Brittany McCrigler
Public	Sim

Ferramentas

Peças

Sinalizadores

Passos