Conserte seus objetos Comunidade Loja
Ajuda

Installing a Plastic Snap Using a Hand Press

Editando passo 8 —
Adicione um título

Tipo de Passo:

Arraste para reorganizar

Mark the fabric where you will be inserting the snap.

Align the fabric in the hand press so that the mark rests directly above the shaft of the cap.

If the fabric is not laying flat, have a friend pull the fabric taut to help keep it flat as you insert the snap.

The cap is on the bottom of the press. Be sure that you place your fabric face down, so that the cap is on the correct side.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.