Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Introdução

This guide will show you how to access and replace the motherboard of your PowerA Enhanced Wireless Controller.

Peças

Nenhum componente especificado.

  1. Remove the battery cover by pressing down on the lever located on the top of the cover. Apply pressure until it clicks out of place, and pull it off. Apply pressure until it clicks out of place, and pull it off.
    • Remove the battery cover by pressing down on the lever located on the top of the cover.

    • Apply pressure until it clicks out of place, and pull it off.

  2. Remove all eight screws using the J0 screwdriver.
    • Remove all eight screws using the J0 screwdriver.

  3. SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits

    SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits
  4. Insert the iFixit opening tool into the seam and gently pry the cover plate up. Remove the cover plate once it is loosened.
    • Insert the iFixit opening tool into the seam and gently pry the cover plate up.

    • Remove the cover plate once it is loosened.

  5. Remove all three screws securing the motherboard using the J00 screwdriver. Remove the motherboard. Remove the motherboard.
    • Remove all three screws securing the motherboard using the J00 screwdriver.

    • Remove the motherboard.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Equipe

USF Tampa, Team S1-G5, Leahy Fall 2019 Membro de USF Tampa, Team S1-G5, Leahy Fall 2019

USFT-LEAHY-F19S1G5

3 Membros

5 Guias de autoria

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 8

Últimos 30 dias: 34

Duração total: 396