I can`t watch some digital channels

i start up auto options to memory the digital chanels but channels up 730 mhz i can`t watch because theu are not in cnannel list.i tried with manual but it is the same.

Update

The problem is that I have 3 TV's but the Sony Bravia can't tune all of the channels and the other TV's can.

Respondido! View the answer Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 2

Comentários:

Can you give us the model number and when you got it (year of manufacture).

por

model number of TV is KDL40R450BBAEP

and year of manufacture is july 2014

por

Has it ever worked? What country are you using it in? Explain the 750 mhz since that is usually reserved for satellite TV.

por

I`m from macedonia and i have new TV Sony bravia and I have cable TV . i watch chanels till 730 mhz but not higher like egzample 746 mHZ and other higher frekfency. I have two other TV samsung and philips and on those I can watch all channels with frekfency higher than 730 MHz

por

Can you give us the model info for one of the working sets? Se below on what your set can access.

por

Mostrar mais 5 comentários

Adicionar um comentário
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

4 Soluções

Solução escolhida

The channels are most likely part of a premium package and are scrambled. Talk to your service provider about this.

If this answer is acceptable please remember to return and mark it accepted.

Esta resposta foi útil?

Pontuação 2
Adicionar um comentário

Depending on the age of the TV it's possible the tuner is limited.

It's also possible the region the set was intended for didn't allow TV's access to these frequencies (Asia or Europe).

Lastly, your tuner maybe bad. You'll need to compare the specs for the Sony set to one of your other sets.

Update

Here's some info I dug up on your Bravia TV (foreign market version):

For the Foreign market: UK Specs and the tuner info: DVB-C

For the US market model US Specs and the tuner info: Clear QAM

As you can see the tuners are not the same which could explain things if you are using this set in the US (north america).

Here's a good guide on the different countries TV frequencies: Television channel frequencies

Lastly heres a good reference on the US cable TV frequencies: Cable Television Channels vs Frequency in MHz

Esta resposta foi útil?

Pontuação 1
Adicionar um comentário

German

Kanalbereich

  • Analog: UHF/VHF/Kabel, abhängig von der Landes-/Gebietsauswahl.
  • Digital: UHF/VHF/Kabel, abhängig von der Landes-/Gebietsauswahl.
  • Satellit*1: IF Frequenz 950-2.150 MHz

Tonausgänge (nur für Spannungsversorgung von 19,5 V)

  • 8 W + 8 W (KDL-40R48xB, KDL-40R45xB)
  • 5 W + 5 W (KDL-32R43xB, KDL-32R41xB)

*1 Nicht alle Fernsehgeräte verfügen über DVB-T2- oder DVB-S/S2-Technologie oder Satellitenantennenanschlüsse. Your set may not have "DVB-T2-or DVB-S/S2"

English

Input/Output Signals

  • Analog: UHF/VHF/Cable, Dependent on the Country/Region
  • Digital: UHF/VHF/Cable, Dependent on the Country/Region
  • Satellite *1: IF 950-2150 MHz Frequency

Audio Outputs (only for power supply from 19.5 V)

  • 8 W + 8 W (KDL-40R48xB, KDL-40R45xB)
  • 5 W + 5 W (KDL-32R43xB, KDL-32R41xB)

*1 Not all television sets will have DVB-T2 tuner with DVB-S/S2 Technology under Satellite use option. Your set may only have "DVB-T2 or DVB-S/S2"

Esta resposta foi útil?

Pontuação 1
Adicionar um comentário

Answer is very simple: When you select Macedonia, Croatia and some other countries TV does not search all frequencies. Because of some lazy and hasty people in Sony , Philips , LG... which didn't check all cable providers in those countries. So when you select DVBC (or before) you have to go to digital settings and choose fully

For Sony

(Channel Setup -> Digital TV Settings -> Digital Setup -> Auto Search Range -> Fully)

(in Croatia: Postavljanje kanala->Postavke za digitalni TV->Digitalno podešavanje->Raspon automatskog pretraživanja->Potpuno)

For Philips

After you select DVBC and Digital or Digital and analog or analog instead of start (pokreni) you have to go on settings (postavke) and channel search method (metoda traženja kanala) Full (Puno )

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

dejan será eternamente grato(a).
Visualizar Estatísticas:

Últimas 24 horas: 5

Últimos 7 dias: 38

Últimos 30 dias: 248

Todo: 12,173