Hi i think this could be more of a loose connection issue, because when you say that you have to apply pressure on the optic drive in order for the wii to work then most likely the issue is located somewhere in that area or underneath the area, so open up, check for loose connection again, and try, always triple check cheers!!

Hi have you tried the solution i suggest to you?, btw just for future use, try to tape the lcd connector point so that it does not come loose again, cheers!

ipad 1 dont have the magnets on the side of the device so nope its not useable

Hi just want to check, you mean you have taken a screenshot and view it on another phone or on the same phone?, if you view the screenshot on another phone then it means that your lcd is faulty, provide us more info and maybe we can isolate and narrow dont the issue, hope that help, cheers!! Update: Hi so based on your answer, it is the lcd that is faulty because when you view it o another phone there is no gray line, hence there is gray lines only on the phone that you are using, changing the lcd should solved the issue

Hi i had this problem also lately, what i did is to download a fan monitoring system or fan controller, so you can adjust and monitor the fan speed and temperature, so i guess this is the cheapest techic, free i guess, and it have been working fine with no overheating, hope that helps cheers!!

Hi have you check the HDD cable friend?, the "?" logo means no OS/HDD detected, so if it has faulty HDD cable then it will indicate the "?" logo., hope that helps cheers!!

Hi did you fix the broken screen yourself or you went to a repair shop?, if you fix it yourself then i would suggest you disassemble your phone, disconnect and reconnect your lcd and touch panel cable, it could be improper connecting of lcd able ribbon that cause this issue, if you went to a repair shop then i would suggest that you return back to the shop and ask for assistance, hope that helps cheers, and alos it could be a case of a faulty lcd and touch panel due to manufacturing defect, so try the above first before trying another lcd and touch panel, cheers!

Hi just disassemble your ipad and disconnect your lcd cable, then reconnect it back, did this happen after a fall?, most probably the connector is loose or worst its the lcd cable, hope that helps cheers!!

Hi since this is your first time opening up the screen and touch panel with a suction cup, so it will be little hard, just try pulling abit harder but becareful of the three cable connecting to the touch panel and lcd, so open in a v formation, example like how you use your hand to imitate a crocodile mouth open > close - open > close -, got it?, pivot the top part of the iPhone, hope this helps cheers!

ok, from your info above my guess is the connection is loose, so you can try to diassemble and reconnect the touch panel connecter, it should resolve your issue