/
Minha bancada de trabalho

Obtenha acesso rápido a guias, peças e respostas para seus dispositivos

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Cadastre-se
Login

Remplacement de l'affichage du mode professionnel du Shark Ultimate

Voltar para o guia
Inglês
Francês
Passo 2
Shark Ultimate Professional Mode Display Replacement: passo 0, imagem 1 %32 Shark Ultimate Professional Mode Display Replacement: passo 0, imagem 2 %32

  • Use the Philips head #0 screwdriver to remove the two 11.77mm screws holding the white clamp to the iron.

  • Use the Philips head #0 screwdriver to remove the two 6.58mm screws holding the black wires to the body of the iron.

  • Removing the left black wire will also free the red wire, attached by the same screw.

Utilisez le tournevis cruciforme n° 0 pour retirer les deux vis de 11,77 mm qui maintiennent la pince blanche au fer.

Utilisez le tournevis cruciforme n° 0 pour retirer les deux vis de 6,58 mm retenant les fils noirs au corps du fer.

Retirer le fil noir gauche libérera également le fil rouge, attaché par la même vis.

-[* black] Use the Philips head #0 screwdriver to remove the two 11.77mm screws holding the white clamp to the iron.
-[* black] Use the Philips head #0 screwdriver to remove the two 6.58mm screws holding the black wires to the body of the iron.
+[* red] Use the Philips head #0 screwdriver to remove the two 11.77mm screws holding the white clamp to the iron.
+[* orange] Use the Philips head #0 screwdriver to remove the two 6.58mm screws holding the black wires to the body of the iron.
[* icon_note] Removing the left black wire will also free the red wire, attached by the same screw.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.