/
Minha bancada de trabalho

Obtenha acesso rápido a guias, peças e respostas para seus dispositivos

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Cadastre-se
Login

Remplacement du profilé du MacBook Core 2 Duo

Aviso: Você está editando um guia tipo pré-requisito. Todas as alterações que você fizer afetarão todos os 13 guias que incluem este passo.

Voltar para o guia
Inglês
Francês
Próximo passo

Traduzindo o passo 1

Passo 1
MacBook Core 2 Duo C-Channel Replacement: passo 0, imagem 1 %32

  • For original Macbook Core Duo and Core 2 Duo models, remove these 3 screws:

  • Two 3 mm Phillips near the right speaker.

  • One 6 mm Phillips threaded through a hole in a plastic finger above the subwoofer.

  • When reinstalling the screw above the subwoofer, be careful not to over-tighten it or the subwoofer's plastic could crack.

  • For Santa Rosa/Penryn and 2009 models, which don't have a c-channel:

  • Remove only the single 3 mm Phillips screw from the right speaker, and skip step 26.

Dévissez les 3 vis suivantes :

Deux vis cruciformes de 3 mm à côté du haut-parleur droit.

Une vis cruciforme de 6 mm fixée à travers un trou dans un dispositif en plastique au-dessus du caisson de basse.

Veillez à ne pas trop serrer la vis au-dessus du caisson de basse, le plastique pourrait craquer.

Les MacBook Santa Rosa et Penryn n'ont pas cette pièce de support. Si vous démontez un de ces modèles, dévissez seulement l'unique vis cruciforme de 3 mm du haut-parleur droit et sautez l'étape 26.

-[* black] Remove the following 3 screws:
+[* black] For original Macbook Core Duo and Core 2 Duo models, remove these 3 screws:
[* red] Two 3 mm Phillips near the right speaker.
[* orange] One 6 mm Phillips threaded through a hole in a plastic finger above the subwoofer.
-[* icon_reminder] Be careful not to over-tighten the screw above the subwoofer too tight or the plastic could crack.
-[* icon_note] Santa Rosa and Penryn MacBooks do not have a c-channel. If you are disassembling either of these models, remove only the single 3 mm Phillips screw from the right speaker and skip step 26.
+ [* icon_reminder] When reinstalling the screw above the subwoofer, be careful not to over-tighten it or the subwoofer's plastic could crack.
+[* black] For Santa Rosa/Penryn and 2009 models, which don't have a c-channel:
+ [* red] Remove only the single 3 mm Phillips screw from the right speaker, and skip step 26.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.