Minha bancada de trabalho

Obtenha acesso rápido a guias, peças e respostas para seus dispositivos

Disconnecting Nintendo DSi Battery Board

Aviso: Você está editando um guia tipo pré-requisito. Todas as alterações que você fizer afetarão todos os 5 guias que incluem este passo.

Voltar para o guia

Inglês

Francês

Traduzindo o passo 2

Passo 2

Disconnecting Nintendo DSi Battery Board: passo 0, imagem 1 %32

Disconnecting Nintendo DSi Battery Board: passo 0, imagem 2 %32

Disconnecting Nintendo DSi Battery Board: passo 0, imagem 3 %32

The power connector (with red and black wires) is difficult to remove without damaging it, unless you take a moment and understand how it works. Look at all of the photos for this step before continuing.
The connector is two pieces -- a white "male" piece (connected to the wires), and a beige "female" part (soldered to the main board).
There is a small "notch" in the female part, to give you a place to insert a small flat-head screwdriver. Put the corner of your screwdriver in there, and twist it gently to push the white part up (away from the main board). Do not try to pull it to the right (towards the battery board).
If it does not lift easily, try again with a smaller screwdriver. You might be pulling the female connector off the board, which will be difficult to repair.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.