Traduzindo o passo 2
Passo 2
Opening the Shell
-
Unscrew the clip-on stand that connects the fan. This can be done by hand.
-
Turn the fan so that the back is facing up and remove the screw on the upper part of the housing.
-
Remove the back casing to reveal the switch's screws on the inner part of the casing. Remove those as well.
-
The switch's settings:
-
Off (center)
-
Speed 1 (left)
-
Speed 2 (right)
Suas contribuições são licenciadas pela licença de código aberto Creative Commons.