Ir para o conteúdo principal

Sostituzione sportello anteriore Cricut Maker

Aviso: Você está editando um guia tipo pré-requisito. Todas as alterações que você fizer afetarão todos os 4 guias que incluem este passo.

Inglês
Italiano
Passo 9
Cricut Maker Front Door Replacement: passo 0, imagem 1 %32 Cricut Maker Front Door Replacement: passo 0, imagem 2 %32 Cricut Maker Front Door Replacement: passo 0, imagem 3 %32
  • Remove a total of seven 10 mm screws from the underside of the door.

  • One side of the base has two 10mm screws.

  • The other side of the base has five 10 mm screws.

Rimuovi le sette viti da 10 mm dalla parte inferiore dello sportello.

Un lato della base ha due viti da 10 mm.

L'altro lato della base ha cinque viti da 10 mm.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.