/
Minha bancada de trabalho

Obtenha acesso rápido a guias, peças e respostas para seus dispositivos

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Cadastre-se
Login

Black Hole® Reisetasche mit Rollen Griff tauschen

Voltar para o guia
Inglês
Alemão
Passo 2
Handle Replacement on a Patagonia Black Hole® Wheeled Duffel, Remove the internal screws: passo 0, imagem 1 %32 Handle Replacement on a Patagonia Black Hole® Wheeled Duffel, Remove the internal screws: passo 0, imagem 2 %32 Handle Replacement on a Patagonia Black Hole® Wheeled Duffel, Remove the internal screws: passo 0, imagem 3 %32
Remove the internal screws

  • Locate the top and bottom handle brackets.

  • Use a Phillips PH2 screwdriver to remove the seven screws securing the handle brackets:

  • Five screws from the top handle bracket

  • Two screws from the bottom handle bracket

  • Set the screws aside to be reused.

Obere Griffhalterung im Innern lokalisieren

Es ist wichtig, dass du die Schrauben beim Entfernen nicht verlierst. Verwende einen kleinen Behälter, damit die Schrauben nicht verloren gehen, nachdem du sie entfernt hast. Damit du besser sehen kannst, solltest du eine Taschen- oder Stirnlampe benutzen.

Finde die innere, obere Griffhalterung, um sie zu entfernen.

Benutze einen Kreuzschlitzschraubendreher #2, um die fünf Schrauben von der inneren, oberen Griffhalterung zu lösen.

Wenn alle Schrauben entfernt sind, kannst du die innere, obere Griffhalterung entfernen.

-[title] Locate Remove Inside Top Handle Bracket
-[* icon_caution] It is important that you do not lose the screws during removal. Use a small container to keep screws from being lost after you remove them. Use a Flashlight or Headlamp to increase visibility.
-[* black] Locate Inside Top Handle Bracket for removal.
-[* black] With a #2 Philips Screw Driver, unscrew all 5 screws of the Inside Top Handle Bracket.
-[* black] Once all screws are removed, you can now remove the Inside Top Handle Bracket.
+[title] Remove the internal screws
+[* black] Locate the top and bottom handle brackets.
+[* black] Use a Phillips PH2 screwdriver to remove the seven screws securing the handle brackets:
+ [* yellow] Five screws from the top handle bracket
+ [* yellow] Two screws from the bottom handle bracket
+[* icon_note] Set the screws aside to be reused.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.