Traduzindo o passo 5
Passo 5
-
To disconnect, use the point of a spudger to push on alternating sides of the connector to "walk" it out of its socket.
| - | [* red] Using your fingers, remove the white plastic connector located to the right of the ribbon connector. |
|---|---|
| + | [* red] To disconnect, use the point of a spudger to push on alternating sides of the connector to "walk" it out of its socket. |
| + | [* icon_note] It may take a lot of alternating before the connector comes out. Be patient, and don't pull on the cables. |
| + | [* icon_reminder] To reconnect the cable, align the connector and use a spudger or clean fingernail to push it fully into the socket. |
| + | [* icon_caution] Don't push on the cables themselves, or you may damage the connector. |
Suas contribuições são licenciadas pela licença de código aberto Creative Commons.