Nintendo Switch Vervanging van de hoofdtelefoonjack en gamekaartlezer

Aviso: Você está editando um guia tipo pré-requisito. Todas as alterações que você fizer afetarão todos os 10 guias que incluem este passo.

Inglês

Holandês

Traduzindo o passo 2

Passo 2

Use a pair of tweezers to slide the digitizer cable horizontally out of its connector on the game card reader board.
Before inserting the cable during reassembly, make sure the ZIF connector locking flap is flipped up.
With the cable parallel to the board, gently slide it into its connector.
Don't force the cable into the connector. If it doesn't insert, ensure the locking flap is flipped up, reposition the cable, and try again.
If your touchscreen doesn't work after the repair but your Game Card reader does, make sure this cable is properly inserted. If your Game Card reader also doesn't work, check the Game Card connector in the next step instead.

-	[* black] Use a pair of tweezers to slide the digitizer cable horizontally out of its connector on the game card reader board.
+	[* black] Use a pair of [product\|IF145-020\|tweezers] to slide the digitizer cable horizontally out of its connector on the game card reader board.
+	[* icon_reminder] Before inserting the cable during reassembly, make sure the ZIF connector locking flap is [link\|https://guide-images.cdn.ifixit.com/igi/3m3hCiITLE1D5mZN.full\|flipped up\|new_window=true].
+	[* icon_reminder] With the cable *parallel to the board*, gently slide it into its connector.
+	[* icon_caution] Don't force the cable into the connector. If it doesn't insert, ensure the locking flap is flipped up, reposition the cable, and try again.
+	[* icon_note] If your touchscreen doesn't work after the repair but your Game Card reader does, make sure this cable is properly inserted. If your Game Card reader also doesn't work, check the Game Card connector in the next step instead.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.