Alterações no passo nº 2
Edição por Phillip Takahashi —
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Insert the flat end of a spudger into the slot on the right side of the |
|---|---|
| + | [* black] Insert the flat end of a spudger into the slot on the right side of the center control cover and pry it up. |
| [* black] Carefully pull the center control cover up along its edges. | |
| [* icon_caution] Do not attempt to completely remove the cover, as it is still attached via a ribbon cable. |