Alterações no passo nº 8
Edição por Phillip Takahashi —
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Place the threaded end of the oil filter onto the engine's oil filter threads, being careful to not get dirt or debri on the filter's seal. | |
| [* black] Turn the filter clockwise by hand until it is snug. Tightening the filter should require a moderate amount of your strength, but not all of it. | |
| [* icon_caution] If the filter is difficult to turn at the beginning of its threads, stop! You may be cross threading the oil filter. Re-align the oil filter and try again. | |
| [* icon_caution] Do not over-tighten your oil filter by using a wrench. Doing so may cause the oil filter seal to leak and will make removing the oil filter very difficult in the future. | |
| - | [* black] Remove the oil drain pan from under the truck |
| + | [* black] Remove the oil drain pan from under the truck. |