Alterações no passo nº 4
Edição por johnsawyercjs —
Edição aprovada por Arthur Shi
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Use a spudger to carefully pry the battery connector up and disconnect it from the logic board. | |
| + | [* icon_note] When reinstalling/replacing the battery connector, make sure to route its short black cable into the channel provided for it in the lower case frame, or else it might press upward on the left edge of the top case at this location, preventing the top case from laying flat here. |