Alterações no passo nº 2
Edição por Jeff Suovanen —
Edição aprovada por Jeff Suovanen
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] [guide|11677|Prepare an iOpener] (or grab a hair dryer or heat gun |
|---|---|
| + | [* black] [guide|11677|Prepare an iOpener] (or grab a hair dryer or heat gun) and heat the face of the watch until it's slightly too hot to touch. |
| [* black] Leave the iOpener on the watch for at least a minute to fully heat the screen and soften the adhesive holding it to the case. | |
| [* icon_note] You may need to reheat the iOpener, or move it around on the screen as sections cool, to heat the screen enough to pry it off. |