Histórico do passo nº 12 do guia How to Fix the C6 Error for a Pressure Cooker

	[* icon_note] If your new high pressure sensor is under-pressurizing or over-pressurizing, follow this step to adjust the pressure sensor.
	[* black] Unplug your Instant Pot and disassemble it until you can access the pressure sensors.
	[* red] Use a spudger to pry away the white adhesive covering the high pressure sensor calibration screw.
	[* green] This reveals the calibration screw's flat screwhead.
-	[* black] If your Instant Pot is *over-pressurizing, use a screwdriver to turn the screw clockwise* (tighten) by a quarter turn. This makes the sensor trigger at a lower heat.
-	[* black] If your Instant Pot is *under-pressurizing, use a screwdriver to turn the screw counter-clockwise* (loosen) by a quarter turn. This makes the sensor trigger at a higher heat.
+	[* black] If your Instant Pot is *over-pressurizing, use a screwdriver to turn the screw clockwise* (tighten) by a quarter turn. This makes the sensor trigger and turn off at a lower heat.
+	[* black] If your Instant Pot is *under-pressurizing, use a screwdriver to turn the screw counter-clockwise* (loosen) by a quarter turn. This makes the sensor trigger and turn off at a higher heat.
	[* black] Reassemble the Instant Pot and perform the pressure test in the previous step. Readjust the calibration screw as needed.
	[* black] Once you've calibrated the Instant Pot, [link\|https://guide-images.cdn.ifixit.com/igi/ElHJ1gkNBdfQpTD6.full\|cover the calibration screw with some silicone or heat-tolerant adhesive\|new_window=true]. This prevents the calibration screw from turning.