Alterações no passo nº 7
Edição por Arthur Shi —
Edição aprovada por Arthur Shi
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* icon_note] Repeat the test on the low pressure sensor if you get a C6L error. | |
| + | [* icon_note] If you don't have a "duo" Instant Pot, you won't have this sensor. |
| [* black] Disconnect the low pressure sensor by squeezing the connector to disengage the lock, then pull straight up. | |
| [* black] Attach a multimeter lead to both exposed ends of the sensor wires, making sure the leads don't touch each other. | |
| [* black] Set the meter to resistance/continuity and make sure the sensor shorts and opens properly. |