Alterações no passo nº 12
Edição por Tiny Machines 3D —
Edição aprovada por Tiny Machines 3D
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] Flash the firmware | |
| [* yellow] Plug the USB-A side into your computer. | |
| [* orange] Plug the other side of the USB into your 3D printer. | |
| [* icon_note] If you purchased your machine new, it came with the proper cable. | |
| [* icon_note] We suggest you use X Loader for PC and Hex Uploader for Mac computers (requires Arduino IDE to be in your Applications folder) | |
| - | [* black] Go to http://bit.ly/2DIIXNi to find firmware flashing info. |
| + | [* black] FIRMWARE |
| + | [* black] Go to http://bit.ly/2DIIXNi to find files and firmware flashing info. |