Alterações no passo nº 12
Edição por Tiny Machines 3D —
Edição aprovada por Tiny Machines 3D
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] Flash the firmware | |
| [* yellow] Plug the USB-A side into your computer. | |
| [* orange] Plug the other side of the USB into your 3D printer. | |
| - | [* icon_note] Most but not all machines come with a cable. Creality machines until recently have used MINI-B but the CR-10 V2 and CP-01 use MICRO-B. Formbot/Vivedino machines use USB-B. |
| + | [* icon_note] Most but not all machines come with a cable. |
| + | [* black] Creality machines until recently have used MINI but the CR-10 V2 and CP-01 use MICRO. |
| + | [* black] Formbot/Vivedino, Mamorubot/Hieha and Artillery/Evnovo machines use USB-B. |