Alterações no passo nº 4
Edição por Tiny Machines 3D —
Edição aprovada por Tiny Machines 3D
- Antes
- Depois
- Sem alteração
Linhas do passo
- | [* yellow] Pull the expandable loom back towards the daughterboard. This is shorten it and expand it so the new probe harness is easy to install. |
---|---|
+ | [title] Disassembly 1d./ Assembly 1a. |
+ | [* yellow] Pull the expandable loom back towards the daughterboard. This will shorten it and expand it so the old probe can be removed/ new probe harness installed easily. |
+ | [* icon_note] Pull the probe from the hot end side to remove it from the loom. |
[* orange] Insert the new probe harness with the small plug going in first. This side plugs into the probe. | |
[* green] Leave about 1-1.5 inches of the tail end of the probe harness exposed next to the ribbon cable connection and reattach the daughterboard cover. |