Alterações no passo nº 4
Edição por Taylor Dixon —
Edição aprovada por Taylor Dixon
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* icon_reminder] If your replacement motor comes with pre-installed rubber isolator feet, remove the bolts in them before installing the new motor. |
|---|---|
| - | [* icon_note] You can re-install the motor with the new feet or the original ones. |
| + | [* icon_reminder] If your replacement motor comes with pre-installed rubber isolator feet, remove the bolts in them before installing the new motor to the frame assembly. |
| + | [* icon_note] You can re-install the motor with the new feet or the original ones, but only the original 11 mm hex head bolts from the frame assembly are long enough to safely secure the motor to the frame. |