Alterações no passo nº 4
Edição por Arthur Shi —
Edição aprovada por Arthur Shi
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* icon_note] This step shows how to angle the pick to avoid damaging the LCD panel. | |
| - | [* black] With |
| + | [* black] With the pick 1 mm in the gap, pivot the pick upwards to a steep angle. |
| [* black] At this angle, carefully push the pick into the gap about 1/2" (13 mm). The pick should slide below the LCD panel. | |
| [* icon_caution] ***Stop if you feel the point of the pick hitting a ridge.*** The pick may be pressing against the edge of the LCD panel. Angle the pick and try again. |