Alterações no passo nº 3
Edição por Arthur Shi —
Edição aprovada por Arthur Shi
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* black] Insert the corner of an opening card into the crevice between the battery and the bottom midframe. |
| + | [* black] Pry the battery out of its recess. |
| + | [* icon_note] If the battery does not budge, the adhesive is not sufficiently weakened. |
| + | [* black] Use an opening pick, an opening tool, or a spudger to pry the battery out. ***Do not use metal tools***. |
| + | [* black] Repeat the adhesive remover/isopropyl alcohol application step and try again. |
| + | [* black] Try applying more heat with an iOpener. |