Alterações no passo nº 7
Edição por Jeff Suovanen —
Edição aprovada por Jeff Suovanen
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* icon_caution] To avoid straining the display cables, don't open the display all the way yet. | |
| [* black] Open the display to about a 45° angle, and use tweezers to peel off the adhesive between the display and the Force Touch gasket. | |
| - | [* black] Thread the adhesive around and behind the display cables to get it off completely, and press the gasket down to re-adhere to the case. |
| - | [* icon_reminder] If the Force Touch gasket itself comes loose and won't stick back down, you should replace both the adhesive underneath the gasket and between the gasket and the display. |
| + | [* black] Thread the adhesive around and behind the display cables to get it off completely. |