Ir para o conteúdo principal

Alterações no passo #2

Edição por Jeff Suovanen

Edição aprovada por Jeff Suovanen

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] [guide|11677|Prepare an iOpener|new_window=true], and heat the display to soften the adhesive securing it in place.
+[title] Apply heat
+[* black] [guide|11677|Prepare an iOpener] (or grab a hair dryer or heat gun) and heat the face of the watch until it's slightly too hot to touch.
+[* black] Leave the iOpener on the watch for at least a minute to fully heat the screen and soften the adhesive holding it to the case.
+[* icon_note] You may need to reheat the iOpener, or move it around on the screen as sections cool, to heat the screen enough to pry it off.