/
DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Cadastre-se
Login

Histórico da introdução: Holystone HS 440 Controller Phone Stand Replacement

Edição por Joaquin Botello —

Edição aprovada por Joaquin Botello

Antes
Depois
Sem alteração
dispositivo
Holystone HS 440
Type
replacement
Thing
Controller Phone Stand
Title
Holystone HS 440 Controller Phone Stand Replacement
Introduction
If the controller phone stand damaged, broken, or cracked and can no longer support holding your cell phone, then the following replacement guide should be the ideal steps to fix your controller phone stand, since the phone stand, as stated before, is used to maintain the stability of your cell phone while using the controller and also holding a perfect view of the drone’s POV when flying on your phone. The tools needed are a 2mm Philip head screwdriver and a pry tool; though, the replacement is quite complicated, so be careful when taking apart the controller.
Time Required Min
Nenhuma estimativa
Time Required Max
Nenhuma estimativa
Difficulty
Moderate
Conclusion
To reassemble your device, follow these instructions in reverse order.
Author
Joaquin Botello
Public
Não

Ferramentas

  • 2mm Philips Head Screwdriver x1 added.
  • iFixit Opening Tool x1 added.

Sinalizadores

  • In Progress added.
  • Student In Progress added.

Passos

Passo nº: 1
Antes
Depois
stepid 366155 stepid 366155