Histórico da introdução: Levoit Core 300-RAC Power Cord Replacement
Edição por David Kamp —
Edição aprovada por David Kamp
- Antes
- Depois
- Sem alteração
| dispositivo |
|
|
| Type |
|
|
| Thing |
|
|
| Title |
|
|
| Introduction |
|
|
| Time Required Min |
15 minutos
|
|
| Time Required Max |
30 minutos
|
|
| Imageid |
Antes
Depois
|
|
| Difficulty |
Moderate
|
|
| Conclusion |
|
|
| Author | ||
| Public |
Não
|
Pré-requisitos de guia
- Nº 1 era empty, mas agora é Levoit Core 300-RAC Filter Replacement.
Ferramentas
- Phillips #2 Screwdriver x1 added.
- Metal Spudger x1 added.
- Wire Cutters/Side Cutters x1 added.
- Wire Stripping/Crimping Tool x1 added.
- Heat Gun x1 This is only necessary if you're using heat shrink tubing to splice the new power cable into place. added.
Peças
- Twist On Wire Nuts x2 These are required if you do not wish to use heat shrink tubing to splice the new power cord into place. added.
- heat shrink tube x2 These are required if you do not wish to use twist on wire nuts to splice the new power cord into place. added.
Sinalizadores
- In Progress added.
- Student In Progress added.
Passos
Passo nº: 1
Antes
Depois