Ir para o conteúdo principal

Histórico da introdução: Wacker Pump PT3A 2012 Impeller Replacement

Edição por Arthur Shi

Edição aprovada por Arthur Shi

Antes
Depois
Sem alteração
dispositivo
Wacker Pump PT3A 2012
Type
replacement
Thing
Mechanical Seal
Title
Wacker Pump PT3A 2012 Mechanical Seal Replacement
Introduction
This guide shows how to remove and replace the mechanical seal for the Wacker Pump PT3A 2012.
'''Note: There are several versions of this device, and each uses a different mechanical seal design that’s incompatible with the others.''' Contact Wacker Neuson with the device serial number, and they will confirm which mechanical seal you need for the device.
Time Required Min
Nenhuma estimativa
Time Required Max
Nenhuma estimativa
Imageid
Antes
Depois
Difficulty
Moderate
Conclusion
To reassemble your device, follow these instructions in reverse order.
Author
Public
Não

Sinalizadores

  • In Progress added.

Passos

Passo nº: 1
Antes
Depois