VooDooQuad 250 Propeller Replacement

Última atualização em June 5, 2017

5 minutos

Muito fácil

Introdução

Chipping or breaking of a propeller for any level drone flier is inevitable. It is an incredibly common troubleshoot, but luckily a simple replacement. Make sure you have a clean working station, and all you'll need is a set of pliers to put on the new set.

O que você precisa

Ferramentas

Slip Joint Pliers
Link do afiliado
Disponível no/na Amazon
Visualizar

A iFixit ganha comissão quando você compra por estes links.

Passo 1 Propeller

VooDooQuad 250 Propeller Replacement, Propeller: passo 1, imagem 1 %32

VooDooQuad 250 Propeller Replacement, Propeller: passo 1, imagem 2 %32

Unplug the power cable of the drone to eliminate unnecessary mishaps.

Editar

Passo 2

With your set of pliers loosen and remove the four bolts holding the propellers to the motor.

Editar

Passo 3

Gently remove the propellers perpendicular to the device.
When placing the new set of propellers on the drone, make sure that the wings angled upward are facing towards the center, or the battery.

Editar

Conclusão

Be careful removing the bolts multiple times because it may create slippage and then this will not allow the bolt nor the propeller to stay on. To reassemble your device, follow these instructions in reverse order

Uma outra pessoa concluiu este guia.