Skateboard Wheel Replacement

Jared Stine e 13 outros colaboradores

Última atualização em April 17, 2019

5 - 10 minutos

Fácil

Introdução

Ir para o passo 1

This manual will show you how to correctly remove wheels, change bearings, and install new wheels onto your skateboard.

You may reuse old bearings, or purchase new ones.

O que você precisa

Peças

Ferramentas

13mm Wrench
Link do afiliado
Disponível no/na Amazon
Visualizar

Exibir mais…

A iFixit ganha comissão quando você compra por estes links.

Passo 1 The skate board fix up

Skateboard Wheel Replacement, The skate board fix up: passo 1, imagem 1 %32

With a 13mm wrench, remove the axle nut located in the center of the wheel.
Set the axle nut aside, and remove the wheel.

Editar

I am having stick like nut

Srijan Suryansh - 29 de set de 2017 Responder

Passo 2 Remove the Bearings

Skateboard Wheel Replacement, Remove the Bearings: passo 2, imagem 1 %32

Position the wheel at the end of the axle.
To remove the bearings, gently pry the wheel at a downward angle.
Perform this prying process on both sides of the wheel.
A bearing spacer should fall out once the bearings are removed.

Editar

Passo 3

Position the new wheel on a flat surface.
Press the bearing into the hole of the new wheel.
Press firmly until the bearing snaps into place. The bearing's outside edges should be flush with the inside bottom edge of the wheel.

Editar

Passo 4

Flip the wheel over.
Insert the bearing spacer into the back the wheel.

Editar

Passo 5

Repeat the method from Step 3 to insert a bearing into the backside of the wheel.
With the bearings in place, the wheel can be placed on the axle.

Editar

Passo 6

Slide one washer onto the axle.

Editar

Passo 7

Slide the wheel onto the axle.
The axle should go through both bearings and the bearing spacer.

Editar

Passo 8

Slide the second washer onto the axle on the outside of the wheel.

Editar

Passo 9

Tighten the axle nut firmly.
Do not over tighten. The wheel should spin freely.
Repeat steps 1-9 for the remaining wheels.

Editar

Conclusão

Once your wheels are installed, you can ride your skateboard. If you feel your wheels hitting the bottom of your deck when you are turning, you may want to refer to the Wheel Bite Prevention guide.

9 outras pessoas executaram este guia.