Introdução
This is a step by step guide to show how to replace the keyboard. Prior to this guide, you will need to refer to the Disassembling guide for the case.
O que você precisa
-
-
-
Remove the four plastic caps with a metal spudger to expose the 6.0 mm Philips JIS #0 case screws.
-
Remove the eight 6.0 mm JIS #0 case screws.
-
-
-
Using a plastic opening tool, separate the two pieces of the case carefully.
-
-
-
-
Remove the six 6.5 mm Philips J0 screws that are connected to the circuit board.
-
-
-
-
Remove the 9.0 mm Philips J0 screw from the blue plastic cover.
-
Once the screw is removed, remove the blue plastic cover.
-
-
-
Remove the two 4.0 mm Philips J0 screws located on the orange case.
-
-
-
Remove the two "L" shaped brackets located on both sides of the device.
-
-
-
Locate the spring that was connected to the "L" shaped bracket and slowly remove it.
-
-
-
Gently lift the circuit board from the case using a plastic opening tool.
-
-
-
Remove the 3.5 mm Philips J0 screw located underneath the circuit board.
-
-
-
Slowly remove the keyboard panel.
-
Remove all of the keys and set them aside with the keyboard panel.
-
-
-
Gently remove the keyboard circuit board with a plastic opening tool.
-
-
Pergunte ao FixBot
To reassemble your device, follow these instructions in reverse order.
Equipe
USF Tampa, Team 8-3, Eyestone Fall 2015 Membro de USF Tampa, Team 8-3, Eyestone Fall 2015
USFT-EYESTONE-F15S8G3
3 Membros
Autoria de 17 guias
1Comentário do guia
Was gifted a mobigo2 for my niece but it came without keyboard .. I was curious if you knew where I might find a replacement keyboard?
