/
DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Cadastre-se
Login
Participe da comunidade de reparos - Criar conta
Disassembling Marshall MS-2 Partner Circuit Board

Disassembling Marshall MS-2 Partner Circuit Board

MacKinley

MacKinley e 3 outros colaboradores

Última atualização em 31 de jul de 2014

Nenhuma estimativa
Moderado

O que você precisa

Ferramentas

  1. Disassembling Marshall MS-2 Partner Circuit Board, Disassembling Marshall MS-2 Micro Amp Case Disassembly: passo 1, imagem 1 %32

    • First be sure to turn the power switch to the off position.

    • Do this by turning the leftmost knob counter-clockwise as until the line points to "off."

    Editar

    To turn the device off, turn the rightmost knob counterclockwise, not the leftmost one (which controls the volume).

    Célestin Taramarcaz - Responder

  2. Disassembling Marshall MS-2 Partner Circuit Board: passo 2, imagem 1 %32 Disassembling Marshall MS-2 Partner Circuit Board: passo 2, imagem 2 %32 Disassembling Marshall MS-2 Partner Circuit Board: passo 2, imagem 3 %32

    • Now remove the battery.

    • On the back of the device locate the battery cover.

    • Remove it by pushing down on the clip.

    • Then pull the piece of fabric until the battery comes out.

    Editar

  3. Disassembling Marshall MS-2 Partner Circuit Board: passo 3, imagem 1 %32 Disassembling Marshall MS-2 Partner Circuit Board: passo 3, imagem 2 %32

    • Use the long, skinny phillips head screwdriver to remove the 4 7/16" screws on the back of the device in the four corners.

    • Once unscrewed, do not try to take each screw out. Move to next step once all screwed have been unscrewed.

    Editar

  5. Disassembling Marshall MS-2 Partner Circuit Board: passo 4, imagem 1 %32

    • Now pull the back panel off and place it down as shown. Pull the panel straight up so you do not lose the screws.

    Editar

  6. Disassembling Marshall MS-2 Partner Circuit Board, Partner Circuit Board: passo 5, imagem 1 %32 Disassembling Marshall MS-2 Partner Circuit Board, Partner Circuit Board: passo 5, imagem 2 %32

    • Use a 9/16" socket to remove the nut around the headphone jack. Be careful to not lose the washer.

    Editar

  7. Disassembling Marshall MS-2 Partner Circuit Board: passo 6, imagem 1 %32

    • Remove the 7/16" phillips head screw.

    Editar

  8. Disassembling Marshall MS-2 Partner Circuit Board: passo 7, imagem 1 %32

    • Grab the headphone jack from inside the case and pull it toward the speaker until you can fully remove it from the device.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

3 outras pessoas executaram este guia.

Gear Up For Future Repairs

Shop all
Mako Driver Kit - 64 Precision Bits

Mako Driver Kit - 64 Precision Bits

736

Sale price $39.95

Pro Tech Toolkit

Pro Tech Toolkit

2358

Sale price $74.95

Prying and Opening Tool Assortment

Prying and Opening Tool Assortment

271

Sale price $9.95

Electronics Cleaning Bundle

Electronics Cleaning Bundle

53

Sale price $23.99

FixMat

FixMat

383

Sale price $36.95

1Comentário do guia

There Is a toroidal transformer inside ?

Jack redmond - Responder

Comentar

Visualizações:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 19

Ao todo: 1,977