Craftsman Model 315.10721 Table Guard Replacement

Última atualização em December 19, 2014

25 - 30 minutos

Moderado

Introdução

The table guard is essential in making sure the Craftsman Model 315.10721 makes the desired cuts. Keep in mind when performing the replacement that disassembling the table guard is time consuming.

O que você precisa

Ferramentas

Exibir mais…

Passo 1 Table Guard

Craftsman Model 315.10721 Table Guard Replacement, Table Guard: passo 1, imagem 1 %32

Using a flathead screwdriver, remove the 1/2" flathead screw to allow the table guard to pivot.

Editar

Passo 2

Pivot the table guard from its upright position to an angle.
Using a Phillips #1 screwdriver, remove the 1" Phillips screw and the nut on the opposite side.

Editar

Passo 3

Using the Phillips #1 screwdriver, remove eight 1" Philips screws from the main case.
Carefully remove the main case to expose the inside of the saw.

Editar

Passo 4

Remove the old table guard by gently lifting it away from the main case.
Replace the old table guard with the new one by placing it in the same orientation as the one removed.

Editar