Ir para o conteúdo principal

Brother XR-40 Stitch Select Knob Replacement

O que você precisa

  1. Brother XR-40 Stitch Select Knob Replacement, Back Panel: passo 1, imagem 1 %32
    • Place the machine on a solid surface.

    • Remove the 14mm Phillips #2 screw holding on the face cover.

  2. Brother XR-40 Stitch Select Knob Replacement: passo 2, imagem 1 %32
    • Remove the two 14mm Phillips #2 screws and two 22mm Phillips #2 screws that secure the rear casing.

  3. Brother XR-40 Stitch Select Knob Replacement: passo 3, imagem 1 %32
    • Lay the machine on its side.

    • Remove the four 10mm Phillips #2 screws that hold the bottom panel in place.

    • The feet will come off with the screws.

  4. Brother XR-40 Stitch Select Knob Replacement: passo 4, imagem 1 %32
    • Remove the bottom panel.

  5. Brother XR-40 Stitch Select Knob Replacement: passo 5, imagem 1 %32
    • Place the machine upright.

    • Remove the rear casing.

    • You may have to wiggle the panel and pull at the same time.

  6. Brother XR-40 Stitch Select Knob Replacement, Stitch Select Knob: passo 6, imagem 1 %32
    • Adjust the knob to gain access to the phillips head screw.

  7. Brother XR-40 Stitch Select Knob Replacement: passo 7, imagem 1 %32
    • Remove the 14mm Phillips #2 screw.

  8. Brother XR-40 Stitch Select Knob Replacement: passo 8, imagem 1 %32
    • Remove the knob.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Kevin Bickers

Membro desde: 02/05/14

673 Reputação

Autoria de 4 guias

Equipe

Cal Poly, Team 2-12, Amido Winter 2014 Membro de Cal Poly, Team 2-12, Amido Winter 2014

CPSU-AMIDO-W14S2G12

Membros da 4

Autoria de 12 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 6

Últimos 30 dias: 19

Duração total: 1,389