Acer Nitro 5 AN515-53-55G9 Wi-Fi Card Replacement

Última atualização em August 2, 2022

20 minutos

Moderado

Introdução

This guide will walk you through the process of replacing a dying or dead Wi-fi card in an Acer Nitro 5 AN515-53-55G9. If you have connectivity issues with your computer, they may be alleviated by installing a new Wi-fi card.

O que você precisa

Ferramentas

Exibir mais…

Passo 1 Wi-Fi Card

Acer Nitro 5 AN515-53-55G9 Wi-Fi Card Replacement, Wi-Fi Card: passo 1, imagem 1 %32

Acer Nitro 5 AN515-53-55G9 Wi-Fi Card Replacement, Wi-Fi Card: passo 1, imagem 2 %32

Flip the laptop upside down so that the bottom is facing up.

Editar

Passo 2

Acer Nitro 5 AN515-53-55G9 Wi-Fi Card Replacement: passo 2, imagem 3 %32

Use the Phillips #0 screwdriver to remove the 9mm screw in the bottom left corner of the RAM tray covering.
Remove the RAM tray cover by prying it up with a plastic opening tool.

Editar

Passo 3

Remove the screw on the Hard Drive tray with a Phillips #0 screwdriver.
Lift up the tray covering using a plastic opening tool.

Editar

Passo 4

Use the Phillips #0 screwdriver to remove the fourteen 9mm screws holding the back cover in place.
Remove the hard drive (if applicable) from the slot prior to removing the back cover.
This device didn't have a hard drive so your device may look different.

Editar

Passo 5

Acer Nitro 5 AN515-53-55G9 Wi-Fi Card Replacement: passo 5, imagem 3 %32

Carefully remove the back shell from the device by prying at the creases with a spudger around all the edges.
Do not forcefully try to separate the shell as you may cause harm to the shell.

Editar