@voydurwarranty
You could try a power refresh in case the software (if there is any in the camera) has become corrupted.
Remove the batteries from the camera and then press and hold the on/off and shutter release buttons for about 15 seconds and then release them.
Reinsert the batteries and check.
If it is a data problem then doing this should reset the camera back to normal.
If it still doesn't work then it may be an electrical problem and the camera will have to be opened to find out what's wrong. Perhaps check that the camera's battery terminals are clean and bright and not corroded etc.
Unfortunately I cannot find a service manual for the camera. You may have better luck