19 de jan de 2024
Versão atual de:
jayeff
Texto:
Hi @carloslope62584 On the DM control board there are 4 resistors used in the circuit for the D and G# notes. They are: - wire 3 - multi resistor RAB36 pins 5-6 10K Ohm and RAB35 5-6 1K Ohm + wire 3 - multi resistor RA836 pins 5-6 10K Ohm and RA835 5-6 1K Ohm - wire 4 - multi resistor RAB36 pins 7-8 10K Ohm and RAB35 7-8 1K Ohm + wire 4 - multi resistor RA836 pins 7-8 10K Ohm and RA835 7-8 1K Ohm See image below: [image|3200175] (click on image)
Status:
open
19 de jan de 2024
Editado por:
jayeff
Texto:
Hi @carloslope62584 On the DM control board there are 4 resistors used in the circuit for the D and G# notes. They are: - wire 3 - multi resistor RAB36 pins 5-6 10K Ohm and RAB33 5-6 1K Ohm + wire 3 - multi resistor RAB36 pins 5-6 10K Ohm and RAB35 5-6 1K Ohm - wire 4 - multi resistor RAB36 pins 7-8 10K Ohm and RAB33 7-8 1K Ohm + wire 4 - multi resistor RAB36 pins 7-8 10K Ohm and RAB35 7-8 1K Ohm See image below: [image|3200175] (click on image)
Status:
open
19 de jan de 2024
Editado por:
jayeff
Texto:
Hi @carloslope62584 On the DM control board there are 4 resistors used in the circuit for the D and G# notes. They are: wire 3 - multi resistor RAB36 pins 5-6 10K Ohm and RAB33 5-6 1K Ohm - wire 4 - multi resistor RAB38 pins 7-8 10K Ohm and RAB33 7-8 1 K Ohm + wire 4 - multi resistor RAB36 pins 7-8 10K Ohm and RAB33 7-8 1K Ohm See image below: [image|3200175] (click on image)
Status:
open
19 de jan de 2024
Editado por:
jayeff
Texto:
Hi @carloslope62584 On the DM control board there are 4 resistors used in the circuit for the D and G# notes. They are: - wire 3 - RAB36 5-6 10K Ohm and RAB33 5-6 1K Ohm + wire 3 - multi resistor RAB36 pins 5-6 10K Ohm and RAB33 5-6 1K Ohm - wire 4 - RAB38 7-8 10K Ohm and RAB33 7-8 1 K Ohm + wire 4 - multi resistor RAB38 pins 7-8 10K Ohm and RAB33 7-8 1 K Ohm See image below: [image|3200175] (click on image)
Status:
open
19 de jan de 2024
Editado por:
jayeff
Texto:
Hi @carloslope62584 - On the DM control board there are 4 resistors used for the power to the D and G# notes. + On the DM control board there are 4 resistors used in the circuit for the D and G# notes. They are: wire 3 - RAB36 5-6 10K Ohm and RAB33 5-6 1K Ohm wire 4 - RAB38 7-8 10K Ohm and RAB33 7-8 1 K Ohm See image below: [image|3200175] (click on image)
Status:
open
18 de jan de 2024
Postagem original de:
jayeff
Texto:
Hi @carloslope62584
On the DM control board there are 4 resistors used for the power to the D and G# notes.
They are:
wire 3 - RAB36 5-6 10K Ohm and RAB33 5-6 1K Ohm
wire 4 - RAB38 7-8 10K Ohm and RAB33 7-8 1 K Ohm
See image below:
[image|3200175]
(click on image)
Status:
open