Aviso: Você está editando um guia tipo pré-requisito. Todas as alterações que você fizer afetarão todos os 3 guias que incluem este passo.
Traduzindo o passo 2
Passo 2
-
Use a Plastic Pry or other plastic tool to unhook the back housing / bezel and remove it.
-
Tip - try prying it open from the top and over to the side. It can be very tight if you are doing this for the first time. The volume rocker and camera button are not part of the housing, so try going around it.
Suas contribuições são licenciadas pela licença de código aberto Creative Commons.