Ir para o conteúdo principal

iPad 4 CDMA Adhesive Strips Replacement (Existing Panel)

Aviso: Você está editando um guia tipo pré-requisito. Todas as alterações que você fizer afetarão todos os 8 guias que incluem este passo.

Inglês
Espanhol

Traduzindo o passo 9

Passo 9
iPad 4 CDMA Adhesive Strips Replacement (Existing Panel): passo 0, imagem 1 %32
  • Use a dry microfiber cloth to clean the LCD and inside of the front panel glass. You may want to use canned air or an air compressor to blow away and dust.

  • Use a pair of tweezers to peel the clear backing up off each adhesive strip.

  • Close the front panel down onto the iPad, careful to place it within the plastic bezel, and careful not to get any dirt or fingerprints between the glass and LCD.

  • To ensure a good seal, place the iPad face down on a padded envelope or cloth and pile a couple of books above it to weigh the screen down. Leave it like this for a few hours before using.

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.