/
Minha bancada de trabalho

Obtenha acesso rápido a guias, peças e respostas para seus dispositivos

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Cadastre-se
Login

一加 Nord 拆解

Voltar para o guia
Inglês
Chinês
Passo 7
OnePlus Nord Teardown: passo 0, imagem 1 %32 OnePlus Nord Teardown: passo 0, imagem 2 %32 OnePlus Nord Teardown: passo 0, imagem 3 %32

  • Although the OnePlus Nord carries no official IP rating, it does use rubber connector gaskets found in the IP68-certified OnePlus 8 Pro—so it may have inherited some water and dust resistance.

  • Gaskets are cheap, but the actual IP testing and certification costs a pretty penny, which OnePlus decided to forego this time. Good on them for including a little protection, even if it's not advertised as such.

  • Remove two Phillips screws and the motherboard lifts out next, revealing some thermal paste on the back.

  • The thermal paste is plopped onto the graphite foil covering the chips, which have additional thermal paste of their own underneath. On the opposite side, the paste transfers heat into a copper element running behind the motherboard and down between the battery and display.

尽管一加 Nord没有官方IP等级，但它确实使用了IP68认证的一加 8 Pro中的橡胶接口垫圈，因此它可能继承了一些防水防尘的特性。

密封垫很便宜，但是实际的IP测试和认证要花一分钱，一加决定这次放弃。即使没有在广告中这样宣传，也可以提供一些保护，这对他们有利。

卸下两颗十字螺丝，然后将主板提起，露出背面的一些导热膏。

将导热膏镀到覆盖芯片的石墨箔上，在其下方具有自己的附加导热膏。在另一侧，焊膏将热量传递到铜元素上，该铜元素在母板后面，电池和显示器之间向下流动。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.