Minha bancada de trabalho

Obtenha acesso rápido a guias, peças e respostas para seus dispositivos

Razor A Wheel Replacement

Voltar para o guia

Inglês

Chinês

Passo anterior Próximo passo

Traduzindo o passo 2

Passo 2

Razor A Wheel Replacement: passo 0, imagem 1 %32

Razor A Wheel Replacement: passo 0, imagem 2 %32

Grab two 3/16" Allen wrenches. Insert one in each screw on the sides of the wheel. Hold one screw in place while turning the other in a counter-clockwise direction, loosening the screw.
Once both screws are removed the wheel should be free and fall out.
One of the screws fits inside the other. The inner screw should be 5.6 mm in length. During reassembly, the screws can be put back in on either side.
During reassembly, do not over-tighten the screws, as you could strip them. They should be just tight enough to prevent the wheel from wobbling.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.