Ir para o conteúdo principal

Motorola Moto Z2 Force Vervanging van het scherm en de vingerafdruksensor

Aviso: Você está editando um guia tipo pré-requisito. Todas as alterações que você fizer afetarão todos os 6 guias que incluem este passo.

Inglês
Holandês
Passo 5
Motorola Moto Z2 Force Display and Fingerprint Sensor Replacement: passo 0, imagem 1 %32 Motorola Moto Z2 Force Display and Fingerprint Sensor Replacement: passo 0, imagem 2 %32 Motorola Moto Z2 Force Display and Fingerprint Sensor Replacement: passo 0, imagem 3 %32
  • Once the screen assembly's right edge is separated, slide your pick around the bottom right corner of the device so it is underneath the bottom edge of the assembly.

  • Slide the tool all along the bottom edge of the phone to slice through the adhesive securing the screen assembly and release the plastic clips.

  • These plastic clips should snap free much easier than the metal ones you released earlier.

  • Leave your tool underneath the bottom edge of the screen assembly to prevent it from re-adhering to the frame. Continue to the next step with a new tool.

Als de rechterzijde van de schermmodule eenmaal los is, schuif je je plectrum langs de rechter onderhoek van het toestel, zodat deze onder de onderkant van de schermmodule komt te zitten.

Schuif je tool langs de gehele onderkant van de telefoon om de lijm aldaar door te snijden. Zorg ook dat je de schermmodule uit de klemmen losmaakt.

Deze plastic klemmen zouden veel makkelijker los moeten klikken dan de metalen klemmen die we eerder tegenkwamen.

Laat je tool onder de onderkant van de schermmodule zitten om te voorkomen dat de lijm zich opnieuw aan het toestel gaat hechten. Ga verder met de volgende stap en gebruik een nieuwe tool.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.