Ir para o conteúdo principal


Moving LCD out of the way to remove random internal components. Internal Prerequisite.


Nenhum componente especificado.

  1. iPad 2 Wi-Fi EMC 2415 LCD Replacement, LCD: passo 1, imagem 1 %32
    • Remove the four 2.0 mm Phillips screws securing the LCD to the rear case.

  2. iPad 2 Wi-Fi EMC 2415 LCD Replacement: passo 2, imagem 1 %32 iPad 2 Wi-Fi EMC 2415 LCD Replacement: passo 2, imagem 2 %32
    • The front panel ribbon cables are connected beneath the LCD. To access them, you'll need to temporarily flip the LCD over and out of the way.

    • Be very careful when moving the LCD, and do not attempt to remove it from the iPad—its display data cable will remain connected while it is rotated over.

    • Lift the LCD from its long edge closest to the volume buttons and gently flip it out of the rear case—like turning the page in a book.

    • Set the LCD face down on the front panel.


To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 1

Últimos 30 dias: 1

Duração total: 558